Canvil Logo Steel Pipe
NIPPLES
GENERAL INFORMATION FOR PIPE NIPPLES
MATERIALS END FINISHES
Manufactured in accordance with ASTM Specification A733 "Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples"
Carbon Steel -

Welded   A53-F
ERW      A53B-E
Seamless A106B
Low Temperature Seamless A333 - Grade 6

FINISHES
Canvil steel nipples are available in black or zinc coatings. Please specify finish required when ordering.

THREADS
Canvil pipe nipples are threaded on both ends with standard tapered pipe threads conforming to the American Standard for Pipe Threads ANSI/ASME B1.20.1

Threads are right hand on each end unless otherwise specified. Lefthand threads or plain ends or combinations are available.

SPECIAL LENGTHS
Canvil can supply special lengths, special threading and special finishes to order.

LENGTH
Nipples with lengths up through 12 in. long have a length tolerance of ± 1/16 in. Nipples over 12 in. long have a tolerance of ± 1/8 in.

IDENTIFICATION
(where practical)

 spnp1-d.gif (96023 bytes)
Welded -


ERW -

Seamless -
 STD none
XS "Trademark, XS"

Stamping available upon request

"Trademark, heat code, schedule, grade"
black phosphate finish for visual reference

 

[Home Page] [Catalog Index]