|
BULL PLUGS |
 |
MATERIAL Unless otherwise specified, Canvil Bull Plugs NPS 2 and larger are manufactured from seamless pipe that meets the chemical and mechanical property requirements of ASTM A106 Grade B. They are marked "A106B" (or "WPB" in accordance with fittings specification ASTM A234). Bull Plugs 1 1/2 and smaller are manufactured from round or hex material that meets the chemical and mechanical property requirements of ASTM A105. They are marked "A105" (or "WPB"). Threads conform with ASME B 1.20.1. Round Bull Plugs are available in all regular schedules (A) and also in solid form (B). |
 |
| All dimensions are in inches. | ||
| Approximate Weight Each, Pounds | ||||||||
| Nominal | ||||||||
| Pipe Size |
Length | SCH 40 |
SCH 80 |
SCH 160 |
XXS | ROUND SOLID |
HEX. SOLID |
HEX. SCH 80 |
| 1/8 1/4 3/8 1/2 3/4 |
2 2 2 1/4 2 1/2 2 3/4 |
- .08 .12 .20 .26 |
- .10 .16 .24 .36 |
- - - .32 .5 |
- - - .4 .6 |
.77 .12 .22 .38 .61 |
.14 .18 .24 .42 .69 |
- .11 .15 .28 .50 |
| 1 1 1/4 1 1/2 |
3 3 1/4 3 1/2 |
.6 .63 .9 |
.8 .94 1.2 |
1.1 1.2 1.6 |
1.2 1.5 2.0 |
1.0 1.7 3.0 |
1.3 2.5 3.0 |
.81 1.3 1.5 |
| 2 2 1/2 |
4 5 |
1.6 2.8 |
2.25 3.8 |
3.3 5.0 |
4.0 6.8 |
4.5 - |
5.2 - |
2.4 - |
| 3 3 1/2 |
6 6 1/2 |
4.6 5.7 |
5.9 7.8 |
8.0 - |
9.0 13.5 |
- - |
- - |
- - |
| 4 | 7 | 9.3 | 10.0 | 16.0 | 18.5 | - | - | - |
| FINISH Swaged Nipples and Bull Plugs are supplied black with rust protection unless zinc plating is specified. |
||||||||
| ORDERING INFORMATION, SWAGED NIPPLES | |||
END CONNECTIONS Swaged Nipples, concentric and eccentric, are available in threaded, bevelled, plain end, or grooved connections, or in any combination of such end finishes. For simplicity the following abbreviations may be used when ordering: |
EXAMPLE (a) 2 x 1 Sch 80 ECC Swages Nipple LET-SEB (b) 3 x 2 Sch 40 Swaged Nipple LEP-SET (c) 1 x 1 1/2 Scj 160 Swaged Nipple TBE (d) 1 sch 40 x 3/4 Sch 80 Swaged Nipple LEB-SET |
||
| BBE Bevelled Both Ends TBE Threaded Both Ends PBE Plain Both Ends LEB Large End Bevelled LET Large End Threaded LEP Large End Plain SEB Small End Bevelled SET Small End Threaded SEP Small End Plain |
Note: (1) |
Unless otherwise specified concentric Swaged Nipples will be
supplied. Swaged Nipples can be supplied with a different schedule wall thickness at each end. |
|
[Home Page] [Catalog Index] [Prev Page]