Canvil logo SOCKET WELD ANVILETS
Full and Reducing Sizes ...
Class 3000 and 6000
Socket Weld Anvilet drawing Socket Weld Anvilet Socket Weld Anvilet cross section drawing
Class 3000 REDUCING and FULL SIZES
Outlet
Size		 Nominal
Run Pipe
Size		 A B C D1
±.03		 E
+.01
-.00		 F Approx. Wt.
Pounds
1/2
1/2
3/4
3/4		 1/2
3/4 to 36
3/4
1 to 36		 1
1
1 1/16
1 1/16		 5/8
15/16
13/16
1 3/16		 15/16
15/16
1 3/16
1 3/16		 .622
.622
.824
.824		 .855
.855
1.065
1.065		 1 1/4
1 1/4
1 7/16
1 7/16		 .2
.35
.27
.4
1
1
1 1/4
1 1/4
1 1/2
1 1/2		 1
1 1/4 to 36
1 1/4
1 1/2 to 36
1 1/2
2 to 36		 1 5/16
1 5/16
1 5/16
1 5/16
1 3/8
1 3/8 		1 1/16
1 7/16
1 3/8
1 3/4
1 5/8
2 		1 7/16
1 7/16
1 3/4
1 3/4
2
2 		1.049
1.049
1.380
1.380
1.610
1.610 		1.330
1.330
1.675
1.675
1.915
1.915 		1 13/16
1 13/16
2 3/16
2 3/16
2 7/16
2 7/16 		.6
.8
.8
1.1
1.2
1.5
2
2
2 1/2
2 1/2		 2
2 1/2 to 36
2 1/2
3 to 36		 1 1/2
1 1/2
1 13/16
1 13/16		 2 1/16
2 9/16
2 1/2
3		 2 9/16
2 9/16
3
3		 2.067
2.067
2.469
2.469		 2.406
2.406
2.906
2.906		 2 15/16
2 15/16
3 7/16
3 7/16		 1.8
2.0
2.5
3.0
Outlet
Size		 Nominal
Run Pipe
Size		 A B C D1
±.03		 E
+.01
-.00		 F Approx. Wt.
Pounds
3
3
3 1/2
3 1/2		 3
3 1/2 to 36
3 1/2
4 to 36		 2
2
2 1/8
2 1/8		 3 1/16
3 11/16
3 9/16
4		 3 11/16
3 11/16
4
4		 3.068
3.068
3.548
3.548		 3.535
3.535
4.040
4.040		 4 1/8
4 1/8
4 3/4
4 3/4		 3.8
4.2
4.3
4.3
4
4		 4
5 to 36		 2 1/4
2 1/4		 4 1/16
4 3/4		 4 3/4
4 3/4		 4.026
4.026		 4.545
4.545		 5 1/8
5 1/8		 7.2
8.0
Class 6000 REDUCING SIZES (Full sizes not available)
Outlet
Size		 Nominal
Run Pipe
Size		 A C D
±.03		 E
+.01
-.00		 F Approx. Wt.
Pounds
1/2
3/4		 3/4 to 36
1 to 36		 1
1 1/16		 3/4
1		 .464
.612		 .855
1.065		 1 9/16
1 25/32		 .58
.9
1
1 1/4
1 1/2		 1 1/14 to 36
1 1/2 to 36
2 to 36		 1 5/16
1 5/16
1 3/8		 1 5/16
1 1/2
1 15/16		 .815
1.160
1.338		 1.330
1.675
1.915		 2 1/4
2 9/16
3		 1.8
2.6
3.0
2 2 1/2 to 36 1 1/2 2 3/4 1.687 2.406 3 5/8 5.8
Each outlet size of the reducing Anvilets listed above is
supplied in several different ranges of run pipe size.
Please refer to the run pipe sizes chart in this catalog.
Class 3000 socket weld Anvilets may be used with Standard and XS pipe.
Class 6000 socket weld Anvilets may be used with Sch. 160 and XXS pipe.

Note: 1 Tolerance on sizes 2 1/2 and larger is ±.06".		 All dimensions are in inches.

[Home Page] [Catalog Index] [Prev Page] [Next Page]