Full and Reducing Sizes... Schedule 160 and Double Extra Strong
|
BUTTWELD ANVILETS Full and Reducing Sizes... Schedule 160 and Double Extra Strong |
||
|
|
|
|
| 1 Dimension 'H' is the distance in inches from the centre of the run pipe to the face of the Anvilet. The weld or root gap is not included in the 'H' dimensions below. | |||
| SCHEDULE 160 and DOUBLE EXTRA STRONG |
| Outlet Size |
A | C | Approx. Wt. Pounds |
| 1/2 3/4 |
1 1/8 1 1/4 |
9/16 3/4 |
.25 .71 |
| 1 1 1/4 1 1/2 |
1 1/2 1 3/4 2 |
1 1 5/16 1 1/2 |
.83 1.25 1.75 |
| 2 2 1/2 |
2 3/16 2 7/16 |
1 11/16 2 1/8 |
2.13 3.38 |
| 3 | 2 7/8 | 2 7/8 | 6.32 |
| 4 | 3 5/16 | 3 7/8 | 10.50 |
| 5 | 3 11/16 | 4 13/16 | 14.25 |
| 6 | 4 1/8 | 5 3/4 | 29.5 |
| The reducing Anvilets listed above for outlet sizes 1/2 to 2 are supplied in several different ranges of run pipe size for each outlet. Please refer to run pipe sizes chart of this catalog. | Schedule 160 and Double Extra Strong buttweld Anvilets may be used in conjunction with Class 6000 fittings. |
| FLAT ANVILETS Class 3000 Threaded, Butweld & Socket Weld |
| Size | A | Approx.
Wt. Pounds |
| 1/4 3/8 1/2 3/4 |
11/16 13/16 1 1 1/16 |
.11 .2 .3 .4 |
| 1 1 1/4 1 1/2 |
1 9/32 1 11/32 1 3/8 |
.7 .9 1.2 |
| 2 2 1/2 |
1 1/2 1 3/4 |
1.8 2.7 |
| 3 | 2 | 3.3 |
| Flat Anvilets are designed to facilitate welding to a flat surface for the installation of branch pipes or fittings. | Class 6000 flat Anvilets are available on application. |
[Home Page] [Catalog Index] [Prev Page] [Next Page]